|
Product
|
|
AIRSEAL
Continuous radiant emitters are supplied in one-row, two-row or three-row frames. Machine-direction radiant dimensions of 11" (280 mm) with a maximum CD dimension of 225" (5700 mm) per row allow for uniform heating across the entire substrate.
Each row can be independently modulated in output from 22%-100% to maintain sheet temperature setpoints to within +/- 5ºF. Both manual and automatic control is available.
Each drying frame can be equipped with an air delivery system that promotes evaporation while evacuating the moisture and combustion products from the work area.
Individual rows can be zoned to accommodate varying sheet widths.
|
|
|
|
MODULAR IR
Individual modular emitters with radiant machine-direction dimensions up to 31.5" MD x 12" CD (800 mm x 300 mm) allow for the maximum power output in the most compact space.
Modular drying frames are available in 31.5", 29.5", 24", 16" & 12" radiant machine-direction sizes to most accurately meet specific application space and heat transfer requirements. Radiant cross machine-direction dimensions are attained in excess of 300" (7600 mm).
Each row can be independently modulated in output from 22%-100% to maintain sheet temperature setpoints to within +/- 5ºF. Both manual and automatic control is available.
Each drying frame can be equipped with an air delivery system that promotes evaporation while evacuating the moisture and combustion products from the work area.
Individual rows can be zoned to accommodate varying sheet widths.
|
|
|
|
MOISTURE PROFILER
To correct cross-machine moisture profile variability, the Modular IR System can be designed with CD zones to as narrow as 1". Each individual zone can be automatically modulated from 22%-100%. Each zone is modulated on ratio to maintain fuel efficiency.
Moisture profiling frames are available in 31.5", 29.5", 24", 16" & 12" radiant machine-direction sizes to most accurately meet specific application space and heat transfer requirements. Radiant cross machine-direction dimensions are attained in excess of 300" (7600 mm).
Each drying frame can be equipped with an air delivery system that promotes evaporation while evacuating the moisture and combustion products from the work area.
Profiling systems can be interfaced with coat weight control systems and a variety of DCS control systems to accurately correct CD web moisture variability.
|
|
|
|
AIR by MARSDEN™
Applications that require the highest evaporation rates along with sheet stabilization benefit from AIR by MARSDEN™.
Separating the air foils from the IR eliminates problems with very high temperature exhaust products that impinge upon the sheet surface and that displace the IR flame front. AIR by MARSDEN™ provides effective, efficient and reliable heat.
Integrating MARSDEN IR Systems with air foils that use the IR exhaust heat provides effective drying solutions with no NOx or CO pollution. Air by MARSDEN™ offers the best combination of high quality production and energy efficiency with 65% + system gas energy efficiency.
A patented built-in heat exchanger provides clean, dry, heated air to the high float air bars in 10 seconds from start-up. The high float air bars secure sheet stability and control by creating a true sine wave
|
|
|
